The AP80 Pro uses advanced photogrammetry for fast, non-contact measurement, capturing 3D coordinates of hundreds of points in minutes.With simple video recording, images are generated automatically, allowing users to extract coordinates directly from photos. It enables safe and efficient measurement of hard-to-reach or hazardous areas.
The AP80 Pro features advanced laser measurement with millimeter-level accuracy for safe non-contact surveying in hard-to-reach or hazardous areas. Its green laser supports fast point-and-shoot operation, while camera-assisted aiming improves targeting accuracy.
AP80 Pro enables surveyors to easily capture 3D coordinates. The output data is compatible with standard 3D modeling software like Context Capture or Agisoft, offering both flexibility and convenience.It supports 3D joint modeling of buildings and facades by integrating drone (UAV) and GNSS data.
The dual cameras deliver an immersive visual stakeout experience.With GNSS and ApekSurv, real-time arrows, distances, and lines are overlaid for guidance. Clear red arrows on the screen lead step by step-just follow them to quickly locate the stakeout point.
With Auto IMU technology, combining satellite navigation, IMU, and vision to resist magnetic interference and provide precise orientation. Without calibration or initialization, it boosts measurement accuracy by up to 30%.The IMU 4.0 allows tilt compensation up to 120, adapting to complex environments.
Versatile Connectivity
The GNSS device supports WiFi, Bluetooth, NFC, USB and a SIM card slot, providing versatile connectivity options for seamless data transfer, real-time updates, and remote communication. This multi-interface design enhances flexibility
| SATELLITES TRACKING | |
| Channels | 1408 |
| GPS | L1C/A, L1C, L2C, L2P(Y), L5 |
| GLONASS | L1,L2,L3* |
| Galileo | E1, E5a, E5b, E6 |
| BDS | B1I, B2I, B3I, B1C, B2a, B2b |
| QZSS | L1C/A, L1C, L2C, L5, L6 |
| NavIC/IRNSS | L5 |
| SBAS | L1C/A |
| L-Band | B2B-PPP & E6-HAS |
| ACCURACY | |
| Real time kinematics (RTK) |
H: 8 mm + 1 ppm RMS V: 15 mm+ 1 ppm RMS Initialization time:<5s(typical) Initialization reliability:>99.9% |
| Post-processing kinematics (PPK) |
H: 3 mm + 0.5 ppm RMS V: 5 mm + 0.5 ppm RMS |
| Static | H:2.5 mm+ 0.5 ppm RMS V:5mm+ 0.5 ppm RMS |
| PPP | H: 5cm RMS|V: 10cm RMS |
| DGPS | H: 0.4 m RMS|V: 0.8 m RMS |
| Single Point | H: 1.5 m RMS|V: 2.5 m RMS |
| Visual survey | Typical 2~4 cm, range 2~15 m (normal lighting conditions) |
| Laser survey | ±8mm + 5mm/m ( Tilt angle within 30° ) |
| AR stakeout | H: 8 mm + 1 ppm RMS V: 15 mm+ 1 ppm RMS |
| Position Frequency | 1Hz 2Hz 5Hz 10Hz 20Hz |
| Time to first fix | Cold start<45s Hot start<10s Signal re-acquisition< 1 s |
| IMU tilt angle | 0-120° |
| IMU tilt survey accuracy | ≤2cm within 60° tilt angle |
| CAMERA | |
| Number of cameras | 2 |
| Pixel | Global shutter 2MP & 5MP |
| Frame rate | 30fps |
| Field of view | 84° |
| Features | 2MP front camera achieve visual measurments & laser aiming 5MP bottom camera achieve AR stakeout |
| COMMUNICATION | |
| UHF radio | 2W Tx/Rx, 450-470 MHz Working range is 8-15km in ideal environments |
| Protocal | TT450,TRIMMARK3,SOUTH,LORA Link rate :9600bps to 19200bps |
| Wifi | 802.11b/g/n/ac Hotspot/Data Link |
| Bluetooth | Bluetooth 5.2 classical/BLE proprietary dual-mode |
| NFC | NFC touch pairing |
| WebUI | Accessible via Wi-Fi |
| 4G Cellular | Integrated full frequency multi band 4G modem supports LTE-TDD/LTEFDD/WCDMA/CDMA2000/UMTS/HSPA+/GSM/GPRS/EDGE |
| I/O port | 1xUSB Type-C port (Data download / Charging) |
| 1xAntenna port(UHF antenna interface) | |
| 1xSim card slot (Supports Nano-sim) | |
| 1x5-pin Lemo port (RS-232) | |
| Data formats | RTCM 2.X, RTCM 3.X, RINEX, NMEA 0183 output,VRS,NTRIP |
| Data storage | 32GB high speed memory |
| ELECTRICAL | |
| Battery | Internal Li-on Battery 7.4V 7000mAh |
| Charging specs | USB Type-C fast charging |
| Operation time | Rover mode:18 hours Base mode :7 hours Static mode :20 hours |
| HARDWARE | |
| Size | 125mm(W) 88mm (H) 4.92inch(W) 3.46inch(H) |
| Weight | 750g(1.65Ib) |
| Front panel | 0.96'' OLED color screen display 2 LED light, 2physical buttons (switchable mode, data link) |
| ENVIRONMENTS | |
| Working temperature | -45°C to +75°C |
| Storage temperature | -55°C to +85°C |
| Humidity | 100% non-condensation |
| Waterproof & Dustproof | IP67 |
| Drop | Survive a 2-meter pole-drop |
| Vibration | IK08 |
